One Second One Shot

1. Prepare

Verify component pinouts against each manufacturer’s datasheet before wiring. Label cut wires with their wire numbers; the same numbers follow them through every stage. Wire colors are written out for black-and-white printing. Custom colors can be named in the wire library.

Progress is saved on this browser for this board revision. Changes to the board or measurements start a new checklist. Printed diagrams are references, not life-size templates.

15 wires to prepare; 445mm total wire, including end allowances.

Parts List

9 unique parts

Links may include affiliate referrals.

2. Cut wires

15 wires · +5mm per end for lead-through

Total wire: 445mm (17.5in)

3. Bend wires

Use the straight-line ruler to mark bend points on the wire before bending. Use the bent shape as a visual reference while bending.

Wire 1 — CONT — L15 → H16 — 23mm — Red

Cut 23mm. Bend 90° down at 15mm.

Wire 2 — OUT — H19 → F13 — 30mm — Yellow

Cut 30mm. Bend 90° left at 20mm.

Wire 3 — TIMING — H11 → F17 — 30mm — White

Cut 30mm. Bend 90° left at 20mm.

Wire 4 — TIMING — G12 → E17 — 33mm — Green

Cut 33mm. Bend 90° down at 8mm. Bend 90° left at 20mm.

Wire 5 — TIMING — F11 → I15 — 23mm — Blue

Cut 23mm. Bend 45° down at 16mm.

Wire 6 — TRIG — L11 → J4 — 33mm — Black

Cut 33mm. Bend 90° up at 10mm.

Wire 7 — TRIG — M12 → E13 — 33mm — Red

Cut 33mm. Bend 90° down at 25mm.

Wire 8 — VCC — H7 → L7 — 20mm — Yellow

Cut 20mm.

Wire 9 — VCC — F7 → C5 — 23mm — White

Cut 23mm. Bend 90° up at 13mm.

Wire 10 — VCC — G6 → H14 — 33mm — Green

Cut 33mm. Bend 90° down at 8mm.

Wire 11 — VCC — G13 → C16 — 28mm — Blue

Cut 28mm. Bend 90° down at 15mm.

Wire 12 — GND — D3 → M3 — 33mm — Black

Cut 33mm.

Wire 13 — GND — D5 → D13 — 30mm — Red

Cut 30mm.

Wire 14 — GND — C14 → I18 — 35mm — Yellow

Cut 35mm. Bend 90° right at 15mm.

Wire 15 — GND — J17 → H26 — 38mm — White

Cut 38mm. Bend 90° left at 28mm.

4. Place wires

Component side. Select a wire to emphasize its route in its own color and highlight its endpoints. Wires follow number order, matching the bend guide and solder checklist.

5. Solder connections

Bottom view: horizontally mirrored. Coordinate names still identify the same physical holes. Highlights mark wire endpoints; wire routes belong on the component side. Check each connection and the listed solder bridges.

Board is horizontally mirrored. Column A is on the right.